-
Glass Bead Steriliser - GBS-5000B
GBS-5000B Rapid Glass Bead Steriliser is a product that uses high temperature glass beads to quickly sterilise small laboratory equipment. It can effectively sterilise small solid metal and glass instruments within 10 seconds, efficiently destroying bacteria and spores. It can be used for surgical forceps, scissors, tweezers, scalpels, needles, inoculation rings and needles, etc., and is commonly used in scientific research laboratories.
-
High Transmittance Pressure Sensitive Membrane - Pressure Sensitive Membrane
It is a high transmittance pressure sensitive film for PCR experiments, which consists of a layer of fluorine release film and a layer of transparent pressure sensitive film glued by silica gel. It can avoid cross contamination between wells in PCR reaction and is a simple and quick sealing film for microtiter plate.
-
Highly Transparent Adhesive Membrane - Adhesive Membrane
A high transmittance adhesive film for PCR experiments that seals well and tears off without residual adhesive. It avoids cross contamination between wells in PCR reactions and is a simple and cost-effective membrane for sealing microplates.
-
Heat Sealable Puncture Membrane - Puncture Membrane
Can be used for all types of microplates and can be easily punctured using manual or automated equipment with a lance tip.
-
Aluminium Composite Membrane - Heat Sealable Membrane
Medical sealing film, with the advantages of alcohol resistance, good sealing and temperature resistance, clean and tidy removal without film residue, is the special sealing film for 96 deep hole plates.
-
Glass Bead Steriliser - GBS-5000A
GBS-5000A Rapid Glass Bead Steriliser is a product that uses high-temperature glass beads to quickly sterilise small laboratory equipment. It can effectively sterilise small solid metal and glass instruments within 10 seconds, efficiently destroying bacteria and spores. It can be used for surgical forceps, scissors, tweezers, scalpels, needles, inoculation rings and needles, etc., and is commonly used in scientific research laboratories.
-
Infrared Inoculation Ring Steriliser - HM-3000E
HM-3000E Infrared Inoculation Ring Steriliser (large calibre) is our newly developed steriliser, the angle of its heater is adjustable, 40 degrees horizontally downwards and 15 degrees horizontally upwards, in addition to the conventional disinfection of inoculation rings, inoculation needles, tweezers and scissors, it can also sterilise triangular vials, test-tube vials and Petri dishes commonly used in laboratories. Because of its ease of use, simple operation, no open flame, no fear of wind, and safe to use, it can be widely used for microbiological experiments in environments such as biosafety cabinets, purification benches, beside extractor fans, and on mobile carts.
-
Infrared Inoculation Ring Steriliser - HM-3000D
HM-3000D Infrared Inoculation Ring Steriliser is our newly developed steriliser, the angle of its heater can be adjusted horizontally downward by 40 degrees and horizontally upward by 15 degrees, in addition to the conventional disinfection of inoculation rings, inoculation needles, tweezers and scissors, it can also sterilise the mouths of triangular vials and test-tube bottles commonly used in the laboratory. Because of its easy to use, simple operation, no open flame, no fear of wind, safe to use, can be widely used in biological safety cabinet, purification bench, next to the exhaust fan, mobile car and other environments for microbiological experiments.
-
Infrared Inoculation Ring Steriliser - HM-3000C
HM-3000C infrared inoculation ring steriliser (large diameter) adopts infrared heat to sterilise, which can be widely used for microbiological experiments in bio-safety cabinets, purification benches, beside extractor fans and on mobile carts because of its convenience, simplicity of operation, absence of open flames, lack of fear of the wind and safety of use. The temperature inside the heating hole can reach more than 800℃, and it takes only 5 to 7 seconds to sterilize; ashing the organic substances in the depth of the ceramic pipe to prevent cross contamination; it can achieve one-time sterilizing effect for inoculation rings, inoculation needles, scissors, tweezers and so on.
-
Infrared Inoculation Ring Steriliser - HM-3000A
HM-3000A infrared inoculation ring steriliser adopts infrared heat energy to sterilise, which can be widely used in bio-safety cabinets, purification benches, beside extractor fans, mobile carts and other environments for microbiological experiments due to its convenience, simplicity of operation, absence of open flames, lack of fear of the wind and safety of use. The temperature inside the heating hole can reach more than 800℃, and it takes only 5 to 7 seconds to sterilize; ashing the organic substances in the depth of the ceramic pipe to prevent cross contamination; it can achieve one-time sterilizing effect for inoculation rings, inoculation needles, scissors, tweezers and so on.
-
Visual Nitrogen Blower - KD200
The KD200 Visual Nitrogen Blower is mainly used for the concentration and preparation of large quantities of samples, such as drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry sample preparation. Working Principle: By blowing nitrogen into the surface of the heated sample, the solvent in the sample is rapidly evaporated and separated, so as to achieve the purpose of anaerobic concentration of the sample and keep the sample purer. The use of nitrogen blowing instrument instead of the commonly used rotary evaporator for concentration, can concentrate dozens of samples at the same time, so that the sample preparation time is greatly reduced, and has the characteristics of time-saving, easy to operate, fast!
-
Nitrogen Blower - MD200-2
The MD200-2 Nitrogen Blower is mainly used for the concentration of large quantities of samples, such as drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry sample preparation. Working Principle: By blowing nitrogen into the surface of heated samples, the solvent in the samples evaporates and separates quickly, so as to achieve the purpose of anaerobic concentration of the samples and keep the samples purer.
