-
Nitrogen Blow Meter - MD200-1A
MD200-1A Nitrogen Blower is mainly used for the concentration and preparation of large quantities of samples, such as drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry sample preparation. Working Principle: By blowing nitrogen into the surface of heated samples, the solvent in the samples evaporates and separates quickly, so as to achieve the purpose of anaerobic concentration of the samples and keep the samples more pure. It can concentrate 96 samples at the same time, which greatly reduces the sample preparation time and is time-saving, easy to operate and fast.
-
Nitrogen Blower - MD200-1
MD200-1 Nitrogen Blower is mainly applied to the concentration and preparation of large volume samples, such as drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry analysis in the sample preparation. Working Principle: By blowing nitrogen into the surface of the heated sample, the solvent in the sample is rapidly evaporated and separated, so as to achieve the purpose of anaerobic concentration of the sample and keep the sample purer. The use of nitrogen blowing instrument instead of the commonly used rotary evaporator for concentration, can concentrate dozens of samples at the same time, so that the sample preparation time is greatly reduced, and has the characteristics of time-saving, easy to operate, fast.
-
Automatic Film Cutter - FCM-3
For use with Nucleic Acid Extractor kits to cut membranes, suitable for Auto-Pure 24D, Auto-Pure 20A, Auto-Pure 20B, Auto-Pure 10B, Auto-Pure 10BS, Auto-Pure 2400, Auto-Pure 2400M.
-
Automatic film cutter - FCM-2
For membrane cutting of nucleic acid extractor kits, suitable for Leap-Pure S24, Leap-Pure H24, Leap-Pure R16 new generation nucleic acid extractors.
-
Fully Automatic Heat Sealer - SealBio-3
The SealBio-3 is a fully automated film sealer for the Ausante Leap-Pure series of 2mL, 8mL and 15mL reagent strips only. The instrument supports the use of 78mm puncturable roll film, aluminium foil roll film and strong heat sealable roll film.
Applicable Consumables: Leap-Pure series 2mL, 8mL, 15mL, 20mL reagent strips
-
Fully Automated Membrane Sealer - SealBio-1
The SealBio-1 is a fully automated membrane sealer for rapid and continuous sealing of microtiter plates. The SealBio-1 can be used to seal ANSI and SBS standard 12-well, 24-well, 48-well, 96-well and 384-well microplates ranging from 3 to 62mm in height, including all kinds of PCR plates, ELISA plates, deep well plates, cell culture plates, etc., as well as 5mL and 10mL reagent strips used in the Ausante Auto-Pure 20B and 24D. The instrument supports the use of 78mm puncturable roll film, aluminium foil roll film, and strong heat-sealable roll film. It is suitable for pre-filling of biochemical reagents, sealing film before PCR assay, long-term preservation of samples, and other experimental applications that require encapsulation of reagents.
Consumables: deep well plates, microplates, PCR plates, Auto-Pure 20B, 24D reagent strips, etc.
-
Nucleic Acid Kit Automatic Film Cutter (for Nucleic Acid Extractor) - FCM-1
It is mainly used for cutting the film after sealing the film of Auto-Pure 20A, 20B and other strip kits, and can be used with semi-automatic microplate heat sealer.
-
Semi-Automatic Microplate Heat Sealer (for Nucleic Acid Extractor) - SealBio-2
SealBio-2 is a compact and easy-to-install microplate heat sealer that prevents sample loss and cross-contamination caused by liquid evaporation and leakage during the testing process by sealing a variety of special heat sealing membranes. Rapid heating, real-time display of sealing temperature, automatic detection of the height of the microplate.
-
Orbital Shaker - OS-200
The OS-200 Orbital Shaker is a compact and simple shaker with brushless DC motor and microcomputer control technology, which offers a wide range of functions and is suitable for biotechnology, microbiology and medical analyses.
-
Orbital Shaker - OS-100
OS-100 Orbital Oscillator (Shaker) is a compact and simple shaker with brushless DC motor technology and microcomputer control technology, with a variety of functions, suitable for biotechnology, microbiology and medical analysis.
-
Hot Lid Metal Bath - IB-20HL
The IB-20HL Thermal Cycling Hot Lid Metal Bath is a Peltier-Based and Microcomputer Controlled metal bath for running PCR reaction programmes. It is designed with innovative interchangeable modules and infinitely adjustable hot lids in order to fit 0.2 ml, 0.5 ml, 1.5 ml and 2.0 ml centrifuge tubes. The IB-20HL Thermal Cycling Hot Lid Metal Bath can be used for a wide range of applications such as PCR, LAMP, NASBA, RPA, preservation and reaction of samples, pre-denaturation of DNA amplification and electrophoresis, serum coagulation, denaturation of nucleic acids and proteins, etc. The IB-20HL Thermal Cycling Hot Lid Metal Bath has a unique feature: the metal bath can be used to run a PCR reaction programme.
-
Hot Lid Metal Bath - IB-10HL
The IB-10HL Hot Lid Metal Bath is a microcomputer controlled programmable metal bath with innovative replaceable modules and infinitely adjustable lid design to fit 0.2ml, 0.5ml, 1.5ml, 2.0ml centrifuge tubes. Hot Lid Metal Baths can be widely used for PCR, LAMP, NASBA, RPA, sample preservation and reaction, DNA amplification and pre-denaturation for electrophoresis, serum coagulation, denaturation of nucleic acids and proteins.
